Search found 8 matches

I will try with 32Mhz crystal in my board with 18f25k50. I will write soon.

Thank you.

ok. But if I use 20MHz in proteus why it doesn't work? I make a new design in proteus but the result is the same.

Thanks for your reply.

yes because in proteus used 20Mhz but I used 4 Mhz in proteus too and nothing.

The wire is 1 meter and the pullup resistor is 4k7 between VCC(5V) and Pin_Data. The crystal is 4MHz with two 32pF capacitor and other 100nF capacitor between VDD and VSS. I don't understand that I u ...

I tested in real board with pic18f25k50 and 16f876A and doesn't work.

In proteus doesn't work.

Thank for your reply. When I started with this design, I used a pic18f25k50. It didn't work. Then I looked for on internet about this problem and I found a lot of information about pic16f877A. I don' ...

Hello, I am trying to use a pic16f876A with a Ds18b20 but it doesn't work. I found an example in this website using pic16f877a.
// (C) copyright 2003 j.d.sandoz / jds-pic !at! losdos.dyndns. ...