Search found 22 matches

After some mods and a bit more optimising, I got it working :D

Thank you Mark you've been very helpful and everyone else. I'm now working on adding more code to make the system more independent.
...

I modded my code!!! I got connect!!!! but look I got some more mess too...

ATE0
AT&K0AT0
OK
at#SKTSET= 0,80,"www.inden.co.uk",0,0; ...

Still no luck

Here is hyperterminal output

***Program started***

AT&K0
at#SKTSET= 0,80,"www.inden.co.uk",0,0;
at#sktto=0
at#sktsav
timeout Buffer contains
v
at#sktop
time ...

Still no luck, i'll mod the program back to your original function (i.e. send an argument of the string to look for into the function) and also add the print of whats in the buffer after an invalid re ...

Hmm I think I spotted something, well my supervisor and I did, the clear_buffer function I made is slightly useless.

At the same time if kbhit returns falls I added a 1ms delay which might cause th ...

I'm still getting no luck with this thing... :'( It seems to print OK all the time, but when I issue a command which returns something else such as CONNECT it just hangs.

THis is my HyperTerminal o ...

Hi Mark, I'm stuck on something else. What i've done is connected another COM port to HyperTerminal to print messages. (Could not be asked with setting up LCD)

Now the modem always seems to get OK ...

waheeeyyyy I got a phone call!!!! :D i'm skipping skipping and more skips :D <tears of joy in between>

I thought CCS couldn't take pointers, obviously wrong.

Thank you!

Ok i'm back, i've now done the cross over connection. RTS still grounded. I modified my code to check for khbit() from the mode. And i've stopped sending commands to the modem. All I do now is send it ...

Oh I see what you are saying. I was thinking about DTE and DCE in terms of who is "controlling". So you are saying that if my modem and PIC worked with my PC, they must be acting and configured as DCE ...

So does the PC cross over on the inside? How come a straight connected cable works with PC. Also what I said was I did try a null connection and that did not work either, infact I had a null connectio ...

Your PIC development board and the modem are both (???) DTE's (???) or is it DCE's (???).

Nope controlling device is DTE so here PIC is DTE so is PC. Modem is DCE.

I tried a cross over conn ...

I've been trying to avoid opening a new topic, but have searched this forum high and low to no avail.

I am using a PIC millenium dev board, a pic18F452(with 4mhz crystal) and a round solutions GSM ...

I tried that too i.e. using printf, but I think my problem is from

#use rs232 (BAUD=9600,XMIT=PIN_A3,RCV=PIN_A2,ERRORS,bits=8,stream=modem)

1. I'm not sure if the XMIT pin should be spe ...

Heh my mate who works right next to me is doing something exactly the same lol so theres 4 of us (plus me) but without the SMS. I currently have this bit of code but I don't think it will work. Well i ...