Search found 10 matches

Hi,
I have been using the disassembly listing but it's 70,000 lines long. (it's a port from an ST6 assembler application)

The real problem is that the listing is not in code location order ie it ...

Hi those with problems programming fuse on some 18F's,

See thread
http://www.ccsinfo.com/forum/viewtopic.php?t=21303.
I had problems and this gave a work around.
I haven't used the ccs system f ...

Hi,
I had a similar problem when I couldn't blow fuses properly when the H4 fuse was set. I don't know if the processor you are using has an H4 fuse but if you read
http://www.ccsinfo.com/forum/view ...

HI,

I had similar problems with the 18F6621.

I contacted CCS Tech Support regarding an issue with setting certain fuses, particularly brownout and power up, with H4 set. Setting the fuses withou ...

I now have an answer to further questions posed CCS technical support:

"Sir,
You need to do it in 2 steps only when one of the PUT, BROWNOUT or BORV fuses change. So if you do it the first time ...

I forwarded the problem to CCS and got a quick response as follows:

"Sir,
After some experiments we found that in some chips(18F6525,18F6585,18F6621 and 18F6680) PUT, BROWNOUT and BORV fuses cou ...

Hi All,

I had a chance to test my 18F6621 design on a MPLAB/ICD-2 set up. I loaded the code from the device into Mplab changed a fuse setting ( one of the ones that gave problems) reprogrammed the ...

Hi dhorvath,

I'm glad you have resolved your problem. It's always good whether it was a simple or complex solution, you can return to the original project and not get diverted.
I haven't resolved ...

I have a simlar problem and originally started a new thread but I think it'll be better if I add it to this thread.
Here's a repeat of my original posting:

I have a design that uses the PIC18F6621 ...

I have a design that uses the PIC18F6621.
When I program it using the ICD-40 through the ICD software or the PCW IDE I get the Verification Results window giving me Configuration Fuses errors.
eg A ...