Search found 12 matches

Thanks for the quick response asmallri.

That was definitely embarassing, especially given that I'd just spent hours ruining nearly all nMCLR-related passives on this board.

I disabled those seri ...

I've used the 18F6722 before without any issues, but I'm having a silly problem with the 18F67K22 where it will only run following the loading of the program below with the ICD, but it won't run on po ...

Does anyone know where I could find a list of all available command line parameters for the ccsload.exe application?

More specifically, I'd like to modify the line in the compiler's "Program C ...

New Reply from CCS Support:

Sorry, I was wrong about SIOW. The problem would have to do with the bootloader loaded in the
PIC. If you based your code on our example program make sure your declar ...

From CCS Support:

This would be a problem with SIOW not the compiler.

What is the date of your SIOW.EXE file?

Try the stand-alone bootloader program on our software download page.

If the ...

Would it be safe to say then that the only way around this issue is to manually edit the application HEX file by adding in that first line or even revert back to an older PCW version that generates th ...

I saw that post, but didn't understand any of the information contained within:

1. What is the PC Software the post was referring to;
2. What is the Microchip HID bootloader (I'm assuming it's a b ...

As always, thanks for the lightning fast response PCM. I completely missed those posts.

In one of them FvM says:

As explained in the linked post, you only need to initialize the extended address ...

I upgraded from v4.083 to v4.137 today.

However, my bootloader and application code that worked perfectly well yesterday with the previous compiler version no longer work today with the latest comp ...

Ben,

Not knowing how to block of filter the configuration bits that come through the application hex, I would guess the safest approach woukd be to ensure they are the same.

I'll try PCM's suggestion and strip out everything except the #INT_TBD ISR and the associated send routine and I'll also add "errors" to the use rs232 directive and a 0.1uF cap between MCLR ...

Hello,

I’m having a problem with an interrupt not working in a boot-loaded program.

In my main program I have a routine that continuously sends out a 17-byte message to an LCD screen using RS4 ...