Search found 13 matches

Hi,
but i really do want to reboot because my code is stucking somewhere.

Thanks for your reply ELCouz by i already tried that and didnt work.

Here's my code:

#include <18F2580.H>
#include <can-18xxx8.c>
#fuses HS, WDT1024
#use delay(clock=2000000 ...

New question eheh!

I'm getting problems on WDT and the output.

Example:

Output: 32
Output: 32
Output: 32
Output: 32
Output: 32
Output: 32
WDT
Output: weird value
Output: 32
Output: 3 ...

I increase the frequency from 10Hz to 100Hz, while the output is
increasing sometimes im getting weird values. Like getting 10Hz
output when the frequency is reaching 80Hz.

You could use a Med ...

anyone ?

I return to 20Mhz Xtal because that problem.

In tests, while i change the frequency sometimes the output pull to a different value.

Example:
I increase the frequency from 10Hz to 100Hz, while t ...

I recently switch from external 20MHz xtal to the internal osc 4Mhz...and now i dont know why, the program just stop.

Im debugging via rs232 and around 100Hz+ to 300Hz input, it stops sending data ...

The problem is probably because:

1. The voltage levels of your input signal are too low. They need
to be at least 0v to 4v levels. (For a PIC running at 5v).

2. Your input frequency m ...

I just change the fuses to #fuses HS and its working now
but only at 1Hz im getting on terminal:

1 Hz
no signal
1 hz
no signal
no signal
1Hz

and so on...

why ?

Dear PCM,

I just tried your code and it doesnt worked for me. Im using pic 18f2580 with external oscillator 20MHz.

In rs232 not even print "Non signal". What is wrong with this?

#in ...

bump!

Thanks for your help but I already read it. I want to send the samples via CAN bus in order to manage a vehicle acceleration.

hi, I'm newbie with this and my english isn't the best but hope I can learn something with you.

the question is, I'm using PIC18F2580 and want to do an ADC with 8 bits, but my problem is that I wan ...